DESIGN
SPONSORED
pressure compensation element with membrane prevents condensation inside the unit. The operating temperature range of the UPSI-2406IP-38AC extends from -20 to +50°C. The high-quality ÖLFLEX input and output cables are permanently installed on the housing. Four slotted holes allow safe and flexible wall or pole mounting of the AC/DC UPS. A pole-mounting kit is available as an option. 24VDC long-term bridging up to 100 hours Uninterruptible power supply (UPS) of sensitive or safety-related 24VDC systems supplied from the AC mains is particularly important in case of blackouts, brownouts, or flicker. For international use, the UP- SI-2406IP-38AC has a wide-range AC input from 90 to 264 VAC with active PFC and high-efficiency AC/DC converter topology. In AC mains operation, which is automatically set after the input voltage is applied, the 24VDC output is activated and the integrated LiFePO4 energy storage is charged at the same time. In case of a voltage drop of the input voltage below the smallest nominal value, the UPS is switched to battery operation with regulated DC output voltage within fractions of a second and enables backup times of up to 100h. When the AC input voltage returns, the UPS is automatically switched back to regular mains operation and charging of the energy storage continues. Integrated LiFePO4 high-per- formance battery pack The LiFePO4 energy storage (lithium iron phosphate) with 330Wh convinces in safety-relevant applications with a particularly stable battery chemistry, a long service life of at least 10 years and more than 6,000 full charge and discharge cycles. Bicker Elektronik deliberately uses the particularly safe lithium iron phosphate chemistry for all high-performance battery packs, which makes thermal runaway almost impossible. The UPSI-2406IP-38AC also meets the safety requirements of the
IEC/EN 62040-1 standard. The battery management system (BMS) monitors and controls the complete charging and discharging process of each battery cell of the energy storage unit. The integrated cell balancing ensures a balanced and even charge of all cells so that the full capacity of the lithium iron phosphate battery pack remains permanently usable. In addition, the UPSI-2406IP-38AC offers a battery start function, which makes it possible to start a 24V application from the battery by
pressing a button on the UPS (up to 6A max. load current), without the AC voltage supply being present. All product advantages at a glance • Outdoor AC/DC UPS for extreme environments • Robust aluminium housing with IP65 protection • Wide AC input range 90...264V with active PFC • Intelligent input current detection • Regulated DC output 24V/6A in battery mode • Input and output cables permanently installed • Temperature range -20...+50°C • Integrated LiFePO4 energy storage (330Wh) • Battery start function via push-button • IEC/EN 62040-1 approval • Pressure compensation element to prevent condensation in the housing • Optionally available: Mounting set for masts
Direct link to UPSI-2406IP-38AC: https://www.bicker.de/en/upsi-2406ip-38ac
43 ELECTRONICSPECIFIER.COM
Powered by FlippingBook